Skip to content
easywire.
Catalog/Capacitors/C0603C105K3PACTU

ORIGINAL COMPONENT

C0603C105K3PACTU

KEMET · 1 µF 25 V X5R ceramic capacitor · 0603 (1608 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginalC0603C105K3PACTUKEMETAlternative 1C1608X5R1E105K080ACTDKAlternative 2885012106030Würth ElektronikAlternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
—
ReviewOriginal part Needs engineering review Needs engineering review—
Stocking evidence——DigiKey stocked listing ↗Reviewed 2026-09-26 · check current stock—
Package0603 (1608 metric)0603 (1608 metric)0603 (1608 metric)—
Capacitance1 µF1 µF1 µF—
Tolerance±10%±10%±10%—
Rated voltage25 V25 V25 V—
DielectricX5RX5RX5R—
Operating temperature−55 to +85 °C−55 to +85 °C−55 to +85 °C—
PolarityNon-polarizedNon-polarizedNon-polarized—
Body dimensionsL 1.60 ±0.15; W/H 0.80 ±0.15 mmL 1.60 ±0.10; W/H 0.80 ±0.10 mmL 1.60 +0.15/−0.10; W/H 0.80 +0.15/−0.10 mm—
Dissipation factor (max)10%5%10%—
Insulation resistance (min)100 MΩ100 MΩ500 MΩ—
Capacitance / DF test1 kHz, 1.0 Vrms; see specification for conditioningNot established1 kHz ±10%, 1.0 ±0.2 Vrms, 25 °C; after specified heat treatment and 24 ±2 h recovery—
Insulation resistance testNot establishedNot establishedRated DC voltage applied for up to 120 s—
SeriesNot establishedNot establishedWCAP-CSGP general purpose—
Details
Datasheets

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions and electrical properties

Differences & datasheets
  • Manufacturer construction, terminal tolerances, and effective capacitance under bias may differ.
  • Check effective capacitance at the circuit's DC bias, temperature, and AC ripple.
  • Verify footprint, height clearance, and required voltage derating before substitution.
  • DC-bias curves, ESR/ESL, ripple heating, aging, and circuit stability have not been matched.

TDK product specificationChecked 26 Sep 2026 · Size; Electrical Characteristics; Other; Product Status

Differences & datasheets
  • Minimum insulation resistance rises from 100 MΩ to 500 MΩ; differing conditioning and package tolerances still need review.
  • Published body and termination tolerances, loss/leakage limits, measurement conditions and aging can differ; compare the fields and source documents.
  • Minimum insulation resistance rises from 100 MΩ to 500 MΩ; differing conditioning and package tolerances still need review.
  • Verify effective capacitance at the actual DC bias, AC amplitude, temperature and age. Recheck regulator stability or filter response at worst-case capacitance.
  • Confirm land pattern, maximum height, voltage margin, ripple heating and soldering profile. These comparisons cover general-purpose MLCCs; special qualification or soft-termination equivalence is not established.
  • DC-bias curves, ESR/ESL across frequency, ripple heating and aging have not been matched in the circuit.
  • Full conditioning and measurement equivalence, qualification, board-flex reliability and assembly-process compatibility remain unverified.

Würth MLCC datasheet001.001 · 2022-03-10; checked 26 Sep 2026 · 1: dimensions and electrical properties

—
Original datasheet

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions and electrical properties

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…