Skip to content
easywire.
Catalog/Capacitors/C1206C104K5RACTU

ORIGINAL COMPONENT

C1206C104K5RACTU

KEMET · 100 nF 50 V X7R general-purpose MLCC · 1206 (3216 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginalC1206C104K5RACTUKEMETAlternative 1885012208087Würth ElektronikAlternative 2Searching…Alternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
——
ReviewOriginal part Needs engineering review——
Stocking evidence————
Package1206 (3216 metric)1206 (3216 metric)——
Capacitance100 nF100 nF——
Rated voltage50 V50 V——
Tolerance±10%±10%——
DielectricX7RX7R——
Operating temperature−55 to +125 °C−55 to +125 °C——
PolarityNon-polarizedNon-polarized——
Insulation resistance (min)10 GΩ5 GΩ——
Dissipation factor (max)2.5%2.5%——
Body dimensionsL 3.20 ±0.20; W 1.60 ±0.20; H 0.78 ±0.10 mmL 3.20 ±0.15; W 1.60 ±0.15; H 0.80 ±0.10 mm——
Capacitance / DF test1 kHz, 1.0 Vrms; see source for conditioning1 kHz ±10%, 1.0 ±0.2 Vrms at 25 °C; preheat 150 ±10 °C for 1 h, then recover 24 ±2 h——
SeriesNot establishedWCAP-CSGP general purpose——
Insulation resistance testNot establishedRated DC voltage applied for up to 120 s——
Details
Datasheets

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

Differences & datasheets
  • Minimum insulation resistance decreases from 10 GΩ to 5 GΩ. Reject if the circuit requires the original leakage limit. Maximum height increases from 0.88 mm to 0.90 mm; confirm clearance, conditioning and aging.
  • Minimum insulation resistance decreases from 10 GΩ to 5 GΩ. Reject if the circuit requires the original leakage limit. Maximum height increases from 0.88 mm to 0.90 mm; confirm clearance, conditioning and aging.
  • Check effective capacitance under actual DC bias, AC amplitude, temperature and age, then verify filter response or regulator stability.
  • Confirm the PCB land pattern, termination dimensions, maximum height, voltage margin, ripple heating and soldering process against both drawings. General-purpose scope only; safety, soft-termination and special qualification equivalence is not established.
  • Full measurement/conditioning equivalence and insulation-resistance test conditions across manufacturers remain unverified.
  • DC-bias curves, ESR/ESL, ripple heating and aging have not been matched in the circuit.
  • Assembly-process compatibility, board-flex reliability and special qualification have not been established.

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

——
Original datasheet

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…