C1608X7R1H103K080AA

TDK product specificationChecked 26 Sep 2026 · Size; Electrical Characteristics; Other; Product Status

• Manufacturer construction, terminal tolerances, and effective capacitance under bias may differ.
• Check effective capacitance at the circuit's DC bias, temperature, and AC ripple.
• Verify footprint, height clearance, and required voltage derating before substitution.
• DC-bias curves, ESR/ESL, ripple heating, aging, and circuit stability have not been matched.

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions and electrical properties

• The candidate specifies a lower DF limit (2.5% versus 3%); this is not a frequency-response equivalence claim.
• Published body and termination tolerances, loss/leakage limits, measurement conditions and aging can differ; compare the fields and source documents.
• The candidate specifies a lower DF limit (2.5% versus 3%); this is not a frequency-response equivalence claim.
• Verify effective capacitance at the actual DC bias, AC amplitude, temperature and age. Recheck regulator stability or filter response at worst-case capacitance.
• Confirm land pattern, maximum height, voltage margin, ripple heating and soldering profile. These comparisons cover general-purpose MLCCs; special qualification or soft-termination equivalence is not established.
• DC-bias curves, ESR/ESL across frequency, ripple heating and aging have not been matched in the circuit.
• Full conditioning and measurement equivalence, qualification, board-flex reliability and assembly-process compatibility remain unverified.

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions and electrical properties