Skip to content
easywire.
Catalog/Capacitors/885012205086

ORIGINAL COMPONENT

885012205086

Würth Elektronik · 100 nF 50 V X7R WCAP-CSGP MLCC · 0402 (1005 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginal885012205086Würth ElektronikAlternative 1CC0402KRX7R9BB104YAGEOAlternative 2Searching…Alternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
——
ReviewOriginal part Needs engineering review——
Stocking evidence————
Package0402 (1005 metric)0402 (1005 metric)——
Capacitance100 nF100 nF——
Rated voltage50 V50 V——
Tolerance±10%±10%——
DielectricX7RX7R——
Operating temperature−55 to +125 °C−55 to +125 °C——
PolarityNon-polarizedNon-polarized——
Insulation resistance (min)500 MΩ1 GΩ——
Body dimensionsL 1.00 ±0.20; W/H 0.50 ±0.20 mmL 1.00 ±0.05; W/H 0.50 ±0.05 mm——
SeriesWCAP-CSGP general purposeNot established——
Insulation resistance testRated DC voltage applied for up to 120 sNot established——
Dissipation factor (max)10%10%——
Capacitance / DF test1 kHz ±10%, 1.0 ±0.2 Vrms at 25 °C; preheat 150 ±10 °C for 1 h, then recover 24 ±2 hNot established——
Details
Datasheets

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

Differences & datasheets
  • Minimum insulation resistance increases from 500 MΩ to 1 GΩ; length/width/height tolerances tighten from ±0.20 mm to ±0.05 mm. Both list 10% DF, but the linked YAGEO sheet does not establish the measurement conditions.
  • Minimum insulation resistance increases from 500 MΩ to 1 GΩ; length/width/height tolerances tighten from ±0.20 mm to ±0.05 mm. Both list 10% DF, but the linked YAGEO sheet does not establish the measurement conditions.
  • Check effective capacitance under actual DC bias, AC amplitude, temperature and age, then verify filter response or regulator stability.
  • Confirm the PCB land pattern, termination dimensions, maximum height, voltage margin, ripple heating and soldering process against both drawings. General-purpose scope only; safety, soft-termination and special qualification equivalence is not established.
  • Full measurement/conditioning equivalence and insulation-resistance test conditions across manufacturers remain unverified.
  • DC-bias curves, ESR/ESL, ripple heating and aging have not been matched in the circuit.
  • Assembly-process compatibility, board-flex reliability and special qualification have not been established.
  • YAGEO capacitance/DF measurement conditions are not provided in the linked generated specification.

YAGEO manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

——
Original datasheet

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…