Skip to content
easywire.
Catalog/Capacitors/885012206071

ORIGINAL COMPONENT

885012206071

Würth Elektronik · 100 nF 25 V X7R WCAP-CSGP MLCC · 0603 (1608 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginal885012206071Würth ElektronikAlternative 1C1608X7R1E104K080AATDKAlternative 2Searching…Alternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
——
ReviewOriginal part Needs engineering review——
Stocking evidence————
Package0603 (1608 metric)0603 (1608 metric)——
Capacitance100 nF100 nF——
Rated voltage25 V25 V——
Tolerance±10%±10%——
DielectricX7RX7R——
Operating temperature−55 to +125 °C−55 to +125 °C——
PolarityNon-polarizedNon-polarized——
Dissipation factor (max)3.5%3%——
Insulation resistance (min)5 GΩ5 GΩ——
Capacitance / DF test1 kHz ±10%, 1.0 ±0.2 Vrms, 25 °C; after specified heat treatment and 24 ±2 h recoveryNot established——
Insulation resistance testRated DC voltage applied for up to 120 sNot established——
Body dimensionsL 1.60 ±0.10; W 0.80 ±0.10; H 0.80 ±0.07 mmL 1.60 ±0.10; W/H 0.80 ±0.10 mm——
SeriesWCAP-CSGP general purposeNot established——
Manufacturer statusNot establishedProduction; not recommended for new designs (checked 26 Sep 2026)——
Details
Datasheets

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions and electrical properties

Differences & datasheets
  • TDK marks this exact candidate not recommended for new designs. Use only for an approved existing design after lifecycle review; DF limit changes from 3.5% to 3%.
  • Published body and termination tolerances, loss/leakage limits, measurement conditions and aging can differ; compare the fields and source documents.
  • TDK marks this exact candidate not recommended for new designs. Use only for an approved existing design after lifecycle review; DF limit changes from 3.5% to 3%.
  • Verify effective capacitance at the actual DC bias, AC amplitude, temperature and age. Recheck regulator stability or filter response at worst-case capacitance.
  • Confirm land pattern, maximum height, voltage margin, ripple heating and soldering profile. These comparisons cover general-purpose MLCCs; special qualification or soft-termination equivalence is not established.
  • DC-bias curves, ESR/ESL across frequency, ripple heating and aging have not been matched in the circuit.
  • Full conditioning and measurement equivalence, qualification, board-flex reliability and assembly-process compatibility remain unverified.

TDK product specificationChecked 26 Sep 2026 · Size; Electrical Characteristics; Other; Product Status

——
Original datasheet

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions and electrical properties

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…