Skip to content
easywire.
Catalog/Capacitors/885012207098

ORIGINAL COMPONENT

885012207098

Würth Elektronik · 100 nF 50 V X7R WCAP-CSGP MLCC · 0805 (2012 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginal885012207098Würth ElektronikAlternative 1C0805C104K5RACTUKEMETAlternative 2Searching…Alternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
——
ReviewOriginal part Needs engineering review——
Stocking evidenceDigiKey stocked listing ↗Reviewed 2026-09-26 · check current stockDigiKey stocked listing ↗Reviewed 2026-09-26 · check current stock——
Package0805 (2012 metric)0805 (2012 metric)——
Capacitance100 nF100 nF——
Rated voltage50 V50 V——
Tolerance±10%±10%——
DielectricX7RX7R——
Operating temperature−55 to +125 °C−55 to +125 °C——
PolarityNon-polarizedNon-polarized——
Insulation resistance (min)5 GΩ5 GΩ——
Body dimensionsL 2.00 ±0.15; W 1.25 ±0.10; H 0.80 ±0.10 mmL 2.00 ±0.20; W 1.25 ±0.20; H 0.78 ±0.10 mm——
SeriesWCAP-CSGP general purposeNot established——
Insulation resistance testRated DC voltage applied for up to 120 sNot established——
Dissipation factor (max)2.5%2.5%——
Capacitance / DF test1 kHz ±10%, 1.0 ±0.2 Vrms at 25 °C; preheat 150 ±10 °C for 1 h, then recover 24 ±2 h1 kHz, 1.0 Vrms; see source for conditioning——
Details
Datasheets

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

Differences & datasheets
  • DF (2.5%) and minimum insulation resistance (5 GΩ) agree. Body length/width tolerances widen, and maximum height changes from 0.90 mm to 0.88 mm. Compare preconditioning, aging and termination geometry.
  • DF (2.5%) and minimum insulation resistance (5 GΩ) agree. Body length/width tolerances widen, and maximum height changes from 0.90 mm to 0.88 mm. Compare preconditioning, aging and termination geometry.
  • Check effective capacitance under actual DC bias, AC amplitude, temperature and age, then verify filter response or regulator stability.
  • Confirm the PCB land pattern, termination dimensions, maximum height, voltage margin, ripple heating and soldering process against both drawings. General-purpose scope only; safety, soft-termination and special qualification equivalence is not established.
  • Full measurement/conditioning equivalence and insulation-resistance test conditions across manufacturers remain unverified.
  • DC-bias curves, ESR/ESL, ripple heating and aging have not been matched in the circuit.
  • Assembly-process compatibility, board-flex reliability and special qualification have not been established.

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

——
Original datasheet

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…