Skip to content
easywire.
Catalog/Capacitors/CC0402KRX7R9BB104

ORIGINAL COMPONENT

CC0402KRX7R9BB104

YAGEO · 100 nF 50 V X7R general-purpose MLCC · 0402 (1005 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginalCC0402KRX7R9BB104YAGEOAlternative 1885012205086Würth ElektronikAlternative 2Searching…Alternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
——
ReviewOriginal part Needs engineering review——
Stocking evidence————
Package0402 (1005 metric)0402 (1005 metric)——
Capacitance100 nF100 nF——
Rated voltage50 V50 V——
Tolerance±10%±10%——
DielectricX7RX7R——
Operating temperature−55 to +125 °C−55 to +125 °C——
PolarityNon-polarizedNon-polarized——
Insulation resistance (min)1 GΩ500 MΩ——
Dissipation factor (max)10%10%——
Body dimensionsL 1.00 ±0.05; W/H 0.50 ±0.05 mmL 1.00 ±0.20; W/H 0.50 ±0.20 mm——
SeriesNot establishedWCAP-CSGP general purpose——
Insulation resistance testNot establishedRated DC voltage applied for up to 120 s——
Capacitance / DF testNot established1 kHz ±10%, 1.0 ±0.2 Vrms at 25 °C; preheat 150 ±10 °C for 1 h, then recover 24 ±2 h——
Details
Datasheets

YAGEO manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

Differences & datasheets
  • Minimum insulation resistance decreases from 1 GΩ to 500 MΩ, and body tolerances widen from ±0.05 mm to ±0.20 mm. Reject if leakage or footprint/clearance limits cannot accommodate this; equal 10% DF limits do not establish equal loss behavior.
  • Minimum insulation resistance decreases from 1 GΩ to 500 MΩ, and body tolerances widen from ±0.05 mm to ±0.20 mm. Reject if leakage or footprint/clearance limits cannot accommodate this; equal 10% DF limits do not establish equal loss behavior.
  • Check effective capacitance under actual DC bias, AC amplitude, temperature and age, then verify filter response or regulator stability.
  • Confirm the PCB land pattern, termination dimensions, maximum height, voltage margin, ripple heating and soldering process against both drawings. General-purpose scope only; safety, soft-termination and special qualification equivalence is not established.
  • Full measurement/conditioning equivalence and insulation-resistance test conditions across manufacturers remain unverified.
  • DC-bias curves, ESR/ESL, ripple heating and aging have not been matched in the circuit.
  • Assembly-process compatibility, board-flex reliability and special qualification have not been established.
  • YAGEO capacitance/DF measurement conditions are not provided in the linked generated specification.

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

——
Original datasheet

YAGEO manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…