Skip to content
easywire.
Part search/Search results

ORIGINAL COMPONENT

885012007057

Würth Elektronik · 100 pF 50 V C0G/NP0 WCAP-CSGP MLCC · 0805 (2012 metric)

Search MouserView on DigiKeySearch LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginal885012007057Würth ElektronikAlternative 1C0805C101J5GACTUKEMETAlternative 2Searching…Alternative 3Searching…
Supplier links
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
——
ReviewOriginal part Needs engineering review——
Stocking evidence————
Package0805 (2012 metric)0805 (2012 metric)——
Capacitance100 pF100 pF——
Rated voltage50 V50 V——
Tolerance±5%±5%——
DielectricC0G/NP0C0G/NP0——
Operating temperature−55 to +125 °C−55 to +125 °C——
PolarityNon-polarizedNon-polarized——
Insulation resistance (min)10 GΩ100 GΩ——
Body dimensionsL 2.00 ±0.15; W 1.25 ±0.10; H 0.60 ±0.10 mmL 2.00 ±0.20; W 1.25 ±0.20; H 0.70 ±0.20 mm——
SeriesWCAP-CSGP general purposeNot established——
Insulation resistance testRated DC voltage applied for up to 120 sNot established——
Manufacturer dielectric designationNP0 Class IC0G Class I——
Temperature coefficient±30 ppm/°C±30 ppm/°C——
Q factor (min)1000Not established——
Capacitance / Q test1 MHz ±10%, 1.0 ±0.2 Vrms at 25 °C; no Class I preconditioningNot established——
Dissipation factor (max)Not established0.1%——
Capacitance / DF testNot established1 MHz, 1.0 Vrms——
Details
Datasheets

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

Differences & datasheets
  • Maximum body height increases from 0.70 mm to 0.90 mm and length/width tolerances widen. Reject if board clearance cannot accommodate this. Minimum insulation resistance increases from 10 GΩ to 100 GΩ.
  • Würth specifies Q ≥1000 at 1 MHz; KEMET specifies DF ≤0.1% at 1 MHz. These are retained as separately sourced limits; broadband RF performance is not established.
  • Maximum body height increases from 0.70 mm to 0.90 mm and length/width tolerances widen. Reject if board clearance cannot accommodate this. Minimum insulation resistance increases from 10 GΩ to 100 GΩ.
  • Check resonant frequency, ESR/ESL, circuit Q and capacitance at the operating frequency. C0G/NP0 identifies the dielectric class; it does not certify RF interchangeability.
  • Confirm the PCB land pattern, termination dimensions, maximum height, voltage margin, ripple heating and soldering process against both drawings. General-purpose scope only; safety, soft-termination and special qualification equivalence is not established.
  • Full measurement/conditioning equivalence and insulation-resistance test conditions across manufacturers remain unverified.
  • Frequency-dependent ESR/ESL, resonant behavior and circuit-level performance have not been matched.
  • Assembly-process compatibility, board-flex reliability and special qualification have not been established.

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions, specifications and test conditions

——
Original datasheet

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions, electrical properties, test conditions and dielectric

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…