Skip to content
easywire.
Part search/Search results

ORIGINAL COMPONENT

CC0603KRX7R9BB104

YAGEO · 100 nF 50 V X7R MLCC · 0603 (1608 metric)

Search MouserView on DigiKeyView on LCSC

Finding alternatives…

Based on dated distributor checks; confirm current stock.

Scroll sideways to compare all alternatives.

Original component and up to three alternatives
SpecificationOriginalCC0603KRX7R9BB104YAGEOAlternative 1885012206095Würth ElektronikAlternative 2C1608X7R1H104K080AATDKAlternative 3C0603C104K5RACTUKEMET
Supplier links
Search MouserView on DigiKeyView on LCSC
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
Search MouserView on DigiKeySearch LCSC
ReviewOriginal part Needs engineering review Needs engineering review Needs engineering review
Stocking evidenceDigiKey stocked listing ↗Reviewed 2026-09-26 · check current stockDigiKey stocked listing ↗Reviewed 2026-09-26 · check current stockDigiKey stocked listing ↗Reviewed 2026-09-26 · check current stockDigiKey stocked listing ↗Reviewed 2026-09-26 · check current stock
Package0603 (1608 metric)0603 (1608 metric)0603 (1608 metric)0603 (1608 metric)
Capacitance100 nF100 nF100 nF100 nF
Rated voltage50 V50 V50 V50 V
Tolerance±10%±10%±10%±10%
DielectricX7RX7RX7RX7R
Operating temperature−55 to +125 °C−55 to +125 °C−55 to +125 °C−55 to +125 °C
PolarityNon-polarizedNon-polarizedNon-polarizedNon-polarized
Dissipation factor (max)3.5%3%3%2.5%
Insulation resistance (min)5 GΩ5 GΩ5 GΩ5 GΩ
Body dimensionsL 1.60 ±0.10; W/H 0.80 ±0.10 mmL 1.60 ±0.10; W 0.80 ±0.10; H 0.80 ±0.07 mmL 1.60 ±0.10; W/H 0.80 ±0.10 mmL 1.60 ±0.15; W/H 0.80 ±0.15 mm
Capacitance / DF testNot established1 kHz ±10%, 1.0 ±0.2 Vrms, 25 °C; after specified heat treatment and 24 ±2 h recoveryNot established1 kHz, 1.0 Vrms; see specification for conditioning
Insulation resistance testNot establishedRated DC voltage applied for up to 120 sNot establishedNot established
SeriesNot establishedWCAP-CSGP general purposeNot establishedNot established
Details
Datasheets

YAGEO manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions and electrical properties

Differences & datasheets
  • The candidate specifies a lower DF limit (3% versus 3.5%); measurement conditions and effective capacitance still require review.
  • Published body and termination tolerances, loss/leakage limits, measurement conditions and aging can differ; compare the fields and source documents.
  • The candidate specifies a lower DF limit (3% versus 3.5%); measurement conditions and effective capacitance still require review.
  • Verify effective capacitance at the actual DC bias, AC amplitude, temperature and age. Recheck regulator stability or filter response at worst-case capacitance.
  • Confirm land pattern, maximum height, voltage margin, ripple heating and soldering profile. These comparisons cover general-purpose MLCCs; special qualification or soft-termination equivalence is not established.
  • DC-bias curves, ESR/ESL across frequency, ripple heating and aging have not been matched in the circuit.
  • Full conditioning and measurement equivalence, qualification, board-flex reliability and assembly-process compatibility remain unverified.

Würth MLCC datasheet002.000 · 2021-01-03; checked 26 Sep 2026 · 1: dimensions and electrical properties

Differences & datasheets
  • Dissipation factor (max): original 3.5%; candidate 3%.
  • Full datasheet review, body/termination tolerances, PCB fit, assembly, qualification and lifecycle checks are not complete.
  • Loss and leakage limits may use different test conditions; missing fields are not evidence of equality.
  • Effective capacitance under DC bias, AC amplitude, temperature and aging, ESR/ESL and regulator stability remain unverified.
  • This automated specification screen is not AI-generated or approved by a human engineer. No drop-in replacement is established.

TDK product specificationChecked 26 Sep 2026 · Size; Electrical Characteristics; Other; Product Status

Differences & datasheets
  • Dissipation factor (max): original 3.5%; candidate 2.5%.
  • Body dimensions: original L 1.60 ±0.10; W/H 0.80 ±0.10 mm; candidate L 1.60 ±0.15; W/H 0.80 ±0.15 mm.
  • Capacitance / DF test: original not established; candidate 1 kHz, 1.0 Vrms; see specification for conditioning.
  • Full datasheet review, body/termination tolerances, PCB fit, assembly, qualification and lifecycle checks are not complete.
  • Loss and leakage limits may use different test conditions; missing fields are not evidence of equality.
  • Effective capacitance under DC bias, AC amplitude, temperature and aging, ESR/ESL and regulator stability remain unverified.
  • This automated specification screen is not AI-generated or approved by a human engineer. No drop-in replacement is established.

KEMET manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions and electrical properties

Original datasheet

YAGEO manufacturer-generated specificationGenerated 26 Sep 2026 · 1: dimensions and electrical properties

Stock and price

SOURCING · MOUSER

Check stock and price

Checking…

Look up a selected part at Mouser. Sourcing information does not establish replacement compatibility.

Checking connection…